1 unpackaged gift boxes should be stored in weatherproof, ventilated, dry place. Product and a good pad to prevent moisture damage.
2 products must go through quality inspection department inspection of qualified, pre-packaged products must be packaged inspector checks.
Dust and other dirt on the three pre-packaged products must be cleaned, the entire packaging process must pay attention to cleanliness, to ensure the quality of packaging. Explosion-proof electrical products and power transmission control device shall cover the plastic bag and then into the box, packaging with simple packaging products, plastic packaging must first use.
4. wrapper
Into the box product must be securely fixed and should not traverse. Fixed manner according to the structure of the selected products, or bolted to wooden flute (blocks) pad tightly compacted. When using wooden flute (block) fixed products, non-pad, push the weak parts of the product, such as: electronic control products with glass doors.
4.1 product packaging depending on the volume, quality selection of the size of the box.
4.2 Load number of products outside the box shall comply with the technical standards of product packaging requirements, and be firmly fixed to ensure that products do not collide with each other.
4.3 Fixed pressure product (mat) flute at the contact with the product should apply a layer of rigid foam or corrugated cardboard and wooden flute on a nail by a suitable method.
5 When the volume of the packaged product quality at or above 50kg Packing boxes at more than 1m3, edges and corners of the box body must be nailed iron gear corners, wooden box for the entire plate and end plate for the endless stalls, fibreboard box and a power transmission control device packaging boxes, wooden boxes sealed after nails must be used for each strip nailed wooden nails around both ends of a wooden box.
From the 6th of shipment under normal storage conditions, packaging protection period is 1 year. During this time, the packaged product should be intact.